Checklist for Water Damage Restoration

Water damage normally is caused by the floodwater, that is highly contaminated. Therefore once you feel your property be the prey of water damage, there are the suggestions to remove or replace the building materials with the new ones...

Caution

• In a condition like water damage, keep your self electricity safe and check for electric or gas hazards.
• You must have your battery power sources ready for the light.
• Do look for structural and electrical damage to make sure that it is safe.
• Never do any chemical actions in such situations.
• Keep wearing rubber gloves, sturdy shoes, and don’t forget eye protection.
• There could also be a threat to snakes, ants, and even some other animals, so be careful.

Following mentioned is a detailed checklist to follow before you get help from water damage downriver Michigan.

1. Check for insurance claims.

If you have insured your property for flood effects, you need to contact the insurer immediately in the condition of water damage.

• Since you have called the insurer, you can not just sit and wait for him to come and see because it can create more damage. You should start to do the cleanup by yourself and take photos before doing so as an inventory. There are a lot of things for cleaning that you can do to enhance safety.
• Clean your house so that the damage is easily visible to the insurer.
• Keep all the proves of loss that you have faced.
• If needed, leave the place immediately but leave a phone number for the insurer to reach you.
• The adjuster will analyze all the damage happened once you have signed the proof of loss deed.

1. Check electrical systems

When a place is damaged by water damage, you need to make sure that you have found all the circuits and have turned off the electricity supplies to prevent from any further damage.

If necessary, you can have an electrician too that can check for the unsafe conditions and grounds so that you can be sure completely.

1. Water sanitation and clean food

Until you get a professionals help or you get a definite source of clean water, you need to purify your water by yourself as you cannot use contaminated water.

There is a simple way of cleaning water, and for that, you need to stain it using a clean piece of cloth or even a filter. After staining boil the water and then wait for it to cool on the room temperature. You can either use liquid chlorine bleach in a specified quantity of boiling can’t be done.

-- ZylaCourtney - 07 Aug 2019